Part Number: UAF42 Hi,
I am designing a signal conditioning board where the analog signals are from various sensors. Some are DC voltages from 0 to 30V and some are AC signals with about 500HZ and 30V ( RMS). Since these signals are from very noisy…
Part Number: UAF42 Hi, I have an application where I am measuring ion current using a Faraday cup in a vacuum chamber. For our measurements, we have a Keithley 616 picoammeter and it does pretty well but we also have quite a bit of noise. I believe the…
Other Parts Discussed in Thread: UAF42 HELLO I/M USING THE UAF42 FOR A 400 THREE PHASE SYNC CLOCK INTO ZERO CROSSING DETECTORS
NOW FOR RF1 AND RF2 I CAME UP WITH 39.80K AND RFb= 5 MEG, BUT THE VALUES FOR R1&2 AND R3&R4 IS NOT LOOKING CORRECT CAN SOME…
Just in case anyone is interested...I've got this working in Windows10.
Following on from what Leon wrote (all that time ago)
From SourceForge I downloaded and installed "DOSBox" ( sourceforge.net/.../)
Then Start...All Apps...DOSBox-0.74...DOSBox…
Hi Ed,
The two-pole, low-pass filter using just two external resistors, RF1 and RF2, is the minimum component low-pass that can be configured with the UAF42. Since RG and RQ are not utilized in this configuration the default response is a AV = 1 V/V…
Other Parts Discussed in Thread: UAF42 Hello,
We are using a butterworth 2nd order filter using UAF42. the circuit was working fine but the IC UAF42 (TSSOP PACK) seems to be over hot during its operation., does this one really operates like this?
Other Parts Discussed in Thread: UAF42 I really need the pinout diagram for the 16-SOIC UAF42. The current datasheet only contains the pinout diagram for the 14DIP.
Other Parts Discussed in Thread: UAF42 Hi,
I have question regarding the variation of UAF42 BPF characteristics from a customer.
They set the center frequency a few KHz and tried to get x1.0 gain at that center frequency with UAF42.
They assumed…
Other Parts Discussed in Thread: UAF42 Hello, I want to build a low-pass filter, with cut-off frequency 1 Hz or 5 Hz (working on which to choose).
The signal I want to filter has a mean of 500 mV, so I wonder if UAF42 is suitable for this voltage. …
Other Parts Discussed in Thread: UAF42 , THS4151 Hello,
I am trying to implement the 2nd order butterworth LP filter for cutoff frequency 70Hz using UAF42 IC and I selected the components as per FILTER42.exe DOS version software and I used subcircuit…
