The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.
Part Number: UCD90160A Hi,
Which hardware do I need to use to program the UCD90160A via JTAG?
Is there any USB blaster connecting to the TI GUI?
Another question -
Does the TRSTn pin is an optional pin for device programming or is it mandatory?
Thanks…
Part Number: UCD90160A Other Parts Discussed in Thread: UCD90120A How can we enable current monitor function for UCD90160A in the Fusion Digital Power GUI? Looks like UCD90120A is okay to monitor current but UCD90160A is not supported yet. Why not add curent…
Part Number: UCD90160A Hi TI e2e team,
I have one question about UCD90160ARGCR hardware design change, could I change capacitor from 1uF (CAP_SMT_0603_1UF_16V_+/-10%_X6S) to 2.2uF (CAP_SMT_0603_2.2UF_10V_+/-10%_X7R) at C484 location for BPCAP pin in below…
Part Number: UCD90160A
Hi,
When I put in the enable names for the all the 16 rails and save the config file the enable names are not being saved in the config file for some reason. When I reopen the config file that I saved the enable pin names are gone…
Part Number: UCD90160A Hello, Team
our customer would like to know which our function support "on the fly" change?
which means no need to power cycle when new setting take action.
Part Number: UCD90160A Hi,
In my case, i am using MON1 pin used for the 3.3V monitoring Purpose, in GUI, as a fault response, if Under voltage or Over Voltage fault is happened, we are disabling all other rails by making enable pin low.
so 3.3V fault happened…
Part Number: UCD90160A Hi TI service team,
Could you help to review attached SCH file for "UCD90160ARGCR" HW design check ?
Please help to regard all parts as stuffed components in design.
Thanks.
TI_UCD90160A_SCH_CHECK_V1.0_20231106 (with WM…
Part Number: UCD90160A Hello expert,
My customer would like to know if there is VCC detect function. Can UCD90160A record it's own Vcc(3.3V) power fault and provide to BMC the next power cycle? if yes, what's the method we need to implement? Thanks a…
Part Number: UCD90160A Hello, Team
we`d like to check our UCD90160A VOUT_COMMAND (0x21) registor,
would it matters if we disable the Closed-Loop Margining mode?
Part Number: UCD90160 Hello expert,
My customer would like to know UCD90160 code can program UCD90160A or not. I checked with previous reply from Yihe, hex file cannot program A version and xml can program A version. But my customer is using hex file…
