Finaly got is solved, thanks Ryan,
I needed to call the DMA read in the Interrupt Now we have a final code that can everyone use.
Signal Analyzer data:
ads_communication and packages.zip
Code for Main
void main(){
SPI_ADS_COM_ON_OFF(1);
SPI_P_config…
Part Number: ADS1298 Hi~
In previously circuit design, we had an error in the reference voltage in our circuit design. Currently, we have adjusted the reference voltage to 5V. The test results are still not as expected.
We are testing the signal with…
Hello Parth,
The feedback I received on the error message is that it is likely an issue caused by your proxy server. This may be something to discuss with your IT department as it does not seem to be an issue on our end.
Regards,
Ryan
Hi Ajay,
For interfacing the EVM daughterboard with Arduino, you will have to consult the schematics in the EVM User Guide and determine the necessary jumper settings and flywire connections required. The documentation for SPI timing, register map, and…
Hi Rayna,
This might be related to the behavior to these questions: https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1011400/ads131b04-q1evm-device-not-supported---error and https://e2e.ti.com/support/data-converters…
Part Number: ADS1298 i would like to learn the application of ADS1298 to be used in physiological measurement application. (for instance: ECG, respiration, pacer). i will appreciate if you share with me my following inquiring:
1) create error budget allocation…
Part Number: ADS1298 Other Parts Discussed in Thread: OPA170 , ADS1299 Hi all,
First off, thanks for the support - I have found this forum to be very helpful when I have general questions about TI products. I am designing for a wireless EEG application…
Part Number: ADS1299EEGFE-PDK
Hi!
So I have been using ADS1299EEGFE-PDK on my laptop before and it worked well. But then I need to change my HDD to SSD so I need to reinstall all apps including the ADS1299EEGFE-PDK Software. When I reinstalled it, this…
Hello TC.
I could fix this issue. It seems the cause is access right into C:\Users\xxxx\Documents\ads1299\saved.
I've modified the "DataDir" in the ADS1299EVM.ini under C:\Program Files (x86)\ADS1299EEG-FE
After that, ADS1299EVM worked fine…