Hi Gunjan,
I recovered the original _config.bld and run the steps. Here're the build output: (Greenish is for step, bluish is for build output of above step)
cd $SYSLINK_ROOT/ti/syslink/ipc/rtos xdc all -PR .
making all: 四 8月 18 10:11:20 CST…
Other Parts Discussed in Thread: CONTROLSUITE Hello,
I am trying to make firmware code for a SCR controller.
Need to work how I can make my 8 analog input voltage to ADC and generate PWM (for R,S,T phase) considering zero crossing and firing angle…
Other Parts Discussed in Thread: DA8XX Hi all,
I am working on beaglebone black custom board with Android JB4.2(kernel version 3.2). Board also has SPI NOR for MLO, uboot.img and uImage . Board has been interfaced with 16 bit MT29F4G16ABADAWP for rootfs…
Hi,
1、i cannot found the difination of ov7670_video_info in my DVSDK4.0,and after I compile the kernel like above and load it on the board ,it occurs error the log is follows:
2 、In the media/davinci/vpif_capture.c file line 2063 if I should change…
Titus, thank you for pointing that out. After I set the default U-Boot variables, the EVMK2H boots Arago-2015.12, but Linux does not recognize root as a valid login:
Arago Project http://arago-project.org k2hk-evm /dev/ttyS0
Arago 2015.12 k2hk-evm…
Part Number: TMS570LS3137 Other Parts Discussed in Thread: HALCOGEN
I am having trouble interfacing with an external memory device over the EMIF Async 1 interface. This is my first time doing this sort of thing so sorry for any mistakes.
1. EMIF Clk…
Impedance Track FAQ Home Page
This is the home page for common Impedance Track (IT) questions.
Please note that not all FAQs will be applicable for the specific gauge being used, as functions have been added over time.
FAQs
What information does…
Hi Amy,
It seems like a timing issue, you can try probing HS/VS and DE signals with a scope or logic analyzer to see if the timing of these outputs is as expected and no jitter issue, etc.
I can't see the values on your schematic, but make sure Pins…
Hi, Diwakar :
Ths for your reply!
1.) It doesn't have other peripheral are connected except usb3.0 hub port .
2.) It doesn't have error msg. Pls see the follow log.
.
NOTICE: BL31: v2.6(release):SUPPORT-GMSL2-TEST-OK-10-g0ae3b65cbb-dirty
NOTICE…
