Savas,
The SWD issue can be dealt here as well.
Apart from verifying all connections, one common is that, if you are powering your board using an external power supply using a voltage different than the 3.3V supplied by a debug probe such as the LP…
Hi,
(In below list items which should be checked again have been marked bold) (Note: other info are left here to give an overview of what has been checked)
Quickstart Calculator:
Note: I did not check all values to match schematic, reference…
Hi Lakshit,
Layout and schematic tips:
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1014511/faq-bq25790-792-798-672-schematic-and-layout-design-tips?tisearch=e2e-sitesearch&keymatch=BQ25790#
For D+…
Hi Che Wen,
(In below list items which should be checked again have been marked bold) (Note: other info are left here to give an overview of what has been checked)
Quickstart Calculator:
Note: I did not check all values to match schematic, reference…
HI Max,
i recommend to go through this documents and check the layout based on that info.
Additional info on layout can be found here :
(1) Four-switch buck-boost layout tip No. 1: identifying the critical parts for layout
(2) Four-switch buck…
Hi Hongbin,
please have a look at this application report series:
(1) Four-switch buck-boost layout tip No. 1: identifying the critical parts for layout
(2) Four-switch buck-boost layout tip No. 2: optimizing hot loops in the power stage
(3…
Add comments from microsoft website:
Troubleshooting common errors
Tip #1: Brightness increment/decrement HID usages only operate only on Mobile systems (battery powered) and require Windows 8.
Tip #2: If the system is attached to an external monitor…
Hi Vinay,
Please visit https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1051774/faq-bq25883-faq-bq2588x-schematic-review-and-layout-tips-for-bq25882-bq25883-bq25886-and-bq25887 for the BQ2588x schematic checklist…
Hi Daniel,
I was able to look over and compare the devices, and I am not sure if the replacement would increase the current drive as they are very similar in their output capabilities. Are there any clues as to why the output current was limited to…
