Part Number: CC1120EMK-868-915 Other Parts Discussed in Thread: CC1101 , CC1120 Hi.
I am completing a PCB design using this eval board as a reference. I would like to know if all the 47nF capacitors can be replaced with 100nF capacitors on the CC120RHBR…
Part Number: LP-EM-CC1312PSIP Other Parts Discussed in Thread: CC1312PSIP Tool/software: Does the CC1312PSIP LaunchPad development kit support both 868 MHz and 915 MHz wireless frequencies ?
If the device only supports the 868 MHz band,
would switching…
Hi Zack,
Target region for 433 MHz SubGHz is China and we are using SmartRF Studio.
Here are some results from first proto measured from balun output before switch. I have tried much more but not recorded all the measurement results because no improvement…
Part Number: SMARTRFTRXEBK Hello E2E Experts,
Good day.
I wanted to buy your CC1175EMK-868-915 product for testing your transmitter. However, the recommended motherboard for this evaluation kit, the SMARTRFTRXEBK, seems to be out of stock in your stores…
Does the frequency of 915 MHz and 868 MHz can pass Asia Telecommunications regulations (China, Japan, Korea)?
Do I just setup the frequency range and tx power to meet the regulations?
The sub-1 PHYs supported can be found in smartrf studio:
For sub1 PHY for 802.15.4, you can also refer to the ti154stack examples:
(in the project's .syscfg file: "RF STACKS" --> "TI 15.4 STACK" --> Radio)
The GFSK PHY…
not exacty sure how your code looks like, so I took the rfPacketTx example from the SDK and made a small demo.
I use the default 50 kbps PHY and change between sending at packet at 868 MHz @ 10 dBm out and at 915 MHz at 0 dBm out.
Code is below:
void…
Hi,
It looks like you are using the reference design for 868/915 MHz - this will not work for the frequency band you are targeting.
Please use the reference design CC13xxEM-7XD-4251 (SWRC330): https://www.ti.com/lit/zip/swrc330
It is designed for the 433…
3) For this you can refer to:
Section 2.2 of SWRA479 ( Achieving Optimum Radio Range ): https://www.ti.com/lit/swra479
Section 2.2.1 of SWRA496 ( CC-Antenna-DK2 and Antenna Measurements Summary ): https://www.ti.com/lit/swra496
Section 4.1 of SWRA328 ( DN031 - CC…
Part Number: LAUNCHXL-CC1352P Other Parts Discussed in Thread: CC1352P Hi, TI team,
I am designing a product using CC1352P and wondering if the reference design is the same for different band of 433, 868 and 915 MHz?
I figure if the band is different…