Hi RGW,
That's what we have figured, so the new components are scaled 868/1260 of their values.
Probably the current network is a compromise between 868 and 915 to match US and EU.
However, this is modifying available modules. If we make a PCB for…
Part Number: CC1352P7 Other Parts Discussed in Thread: WI-SUN , Tool/software: Hi !
I am developing hardware using the CC1352P7 to run Wi-SUN. I used the Launchpad LP-CC1352P7-1: 868/915 MHz up to 20 dBm, 2.4 GHz up to 5 dBm as a reference.
I just didn…
Other Parts Discussed in Thread: CC1120EMK-868-915 , CC1120 , CC1200 Hi,
Evaluation Kit "CC1120EMK-868-915"
Is this assessment of 920MHz is possible?
If you can not, please tell me the evaluation board can evaluate the 920MHz.
Best Regards,
…
Hi Arif,
The CC1311R3 is designed as a low-cost option for the CC131x devices. A quick reference is SWRA814 ( SimpleLink CC131x and CC135x Family Hardware Migration Guide ) https://www.ti.com/lit/swra814 for an overview from a hardware perspective.
100m LOS…
Part Number: CC1101 Other Parts Discussed in Thread: CC110L , SMARTRFTRXEBK , CC1120 Team,
Customer is looking for evaluation card for both CC1101 and CC110L. The goal is to do some evaluation in the following band: Base freq. 867.999 Mhz, channel spacing…
Hi Kevin,
Just to align the measurements.
Can you measure the output power at 868 MHz and 915 MHz to see if this correlates to the expected output power settings before we start to tweek the design to 940 MHz ?
Thanks.
Other Parts Discussed in Thread: CC-ANTENNA-DK2 , CC1310 , CC1120 Tool/software: TI C/C++ Compiler Dear Sir,
CC1310-1190 launchpad has PCB antenna, which is an 868/915/920 MHz. instead of PCB antenna. I want to use a omnidirectional antenna. which has higher…
Hi,
Here below is our schematic of that failing product.
They use the balun Johanson 0896BM15A0001 followed by some recommended filter components by the Johanson datasheet.
But have no filter as in our schematic, unless that would be integrated in the…
Part Number: CC1120EM-868-915-RD Other Parts Discussed in Thread: CC1120 Does cc1120 support interleaving and spread spectrum?If CC1120 confirms that these functions are supported, which registers are involved in configuring these functions?
Hello Nir,
I am closing this thread since this is very old and I assume that this issue has been resolved.
Please create new thread if you are still having trouble.
Regards,