Part Number: CC2640 Hi Expert,
Do we support RTS/CTS in CC2640 5XD version? I found the UART_RTS/CTS pins in CC2640R2DK_5XD.h are unassigned.
Which IOID could I SET?
/* UART Board */ #define CC2640R2DK_5XD_UART_RX IOID_1 /* P1.7 */ #define CC2640R2DK_5XD_UART_TX…
Part Number: CC2640R2F
Hi
We are trying to run BTOOL (C:\ti\simplelink_cc2640r2_sdk_5_30_00_03\tools\blestack\btool)
on BLE stack((simplelink_cc2640r2_sdk_5_30_00_03\examples\rtos\CC2640R2_LAUNCHXL\blestack\host_test) )
CC2640R2F launchpad but with…
Part Number: CC2640 Hi Team:
In the production stage, it was found that some devices crashed after the program was programmed, and the crystal oscillator did not vibrate after being powered on again; through hardware, manually adding a low level to the…
Part Number: CC2640
Dear expert,
I would like to change the app image start up address to the higher half address of the flash other than 0x0000 0000. How could I do? Thank you
Part Number: CC2640 Other Parts Discussed in Thread: LAUNCHXL-CC2650 , CC2650 Hi everyone,
I need to pullup a UART Rx pin (IOCFG8: PULL_CTL = 0x2). But after calling UART_open() IOCFG8 is set: PULL_CTL = 0x3 What am I doing wrong?
Board_UART_RX | PIN_INPUT_EN…
Part Number: CC2640 Hi.
We use the function to boost the signal by +5dbm, for this we run the command: HCI_EXT_SetTxPowerCmd(HCI_EXT_TX_POWER_5_DBM);
Is it necessary to enable this command somewhere else to work permanently at +5dbm?
Part Number: CC2640 Hi, I'm trying to install the ARM CGT on CCS running on an M2 Mac.
I can find these for win32 and linux, but not for Mac - Please can you let me know if they're availble.
Thanks, Toby
Part Number: CC2640 Hi I am using a CC2640 with a booster amplifier, the power is controlled through the TX power setting, the settings I am having is based on TI' eval board. For our design a need settings with a finer grid below 0 dBm. Is there a document…
Part Number: CC2640 Hi.
The micro_eddystone_beacon_cc2640r2lp_app project has a static void function MicroEddystoneBeacon_bcast_advPrepareCB(void). Is there a similar feature in blestack 4?