I am now trying out the C6678 evm board.
For the DIP switch from SW3 - SW6 to SW9 from 1 to 4 for each DIP switch, the recommended switch configuration in the quick start guide are as follows:
a. 1101 0000 0001 0000 00
b. 1101 0000 0000 0000…
Hi, all
I'm trying to connect FMC-DAC adapter (Rev D) to DAC31X1 evaluation board. The problem is that HSMC connectors seem to be mechanically incompatible. I simply cannot plug it in. Are there number of different FMC-DAC adapters?
Best regards.…
Hello Hina,
Thank you for the answer. I succeeded in accessing I2C registers via a tool from Texas Instruments Fusion Digital Power Designer called SMBus & I2C & SAA Debug Tool in my Windows 8 PC.
Best wishes,
Other Parts Discussed in Thread: DAC34H84 Hi,
I am using the DAC34H84 EVM board and connected it to the network voltage (230 V AC - 6 V DC) adapter that came in the package. The adapter burned by disconnecting the whole setup from the 230V AC. Even…
Hi Antonio,
My apologies, I shared a schematic that was to 3V out. Looks like you were able to easily modify it to 3.3V, though.
We have a DIP ADAPTER EVM that allows you to convert a VSSOP to PDIP: http://www.ti.com/tool/DIP-ADAPTER-EVM
Would that…
Other Parts Discussed in Thread: BQ78PL116 Hello.
I have a problem.
I use GPIO to USB EVM Adapter for bq78PL116 EVM connection. About 1 week all was right. But today Windows says that this is "Unknown device" and cannot get driver for this.
BQWIZZARD…
Hi Alejandro,
We found that a passive PCI backplane will not work as the TX/RX/CLK signals on the "motherboard" slot in the PCIe passive backplane is not wired compatible with TI and FPGA cards.
Ultimetely we layed out and manufactured a custom backplane…
Hi Mrudula, We recently created a TI design document for HEVC codecs running on Shannon EVM. Please see below link:
www.ti.com/.../tidua83.pdf
This TI design was tested on 12.04 64bit. One thing I notice was that after IBL flash board was not recognized…
Hi Anthony,
Yes. It supports. Linux host loader should be re-build to use it.
PATH: ti\mcsdk_2_01_02_06\tools\boot_loader\examples\pcie\linux_host_loader
Please refer readme.pdf (\mcsdk_2_01_02_06\tools\boot_loader\examples\pcie\docs\Readme.pdf…
