Part Number: DLPDLCR3010EVM-G2 Tool/software: I have two issues. One is the projector won't turn on, I can use DLP Light Crafter Display GUI version 7.4 to read/write I2C fine. But no light projected.
The second problem is when I connect the board…
Part Number: DLPDLCR3010EVM-G2 Other Parts Discussed in Thread: MSP-FET Tool/software: Dear Team,
I noticed a pin difference between the J1 interface on the EVM and the XDS110. Should I remove pin 6 on the EVM?
Also, is there any documentation for…
Part Number: DLPDLCR3010EVM-G2 Other Parts Discussed in Thread: DLPC3433 , DLPA3000 Tool/software: When I tried updating firmware to version 7.4.3, I get an error: firmware selected is for a different EVM
I'm using this for image: FWSel_DLPC3433_DLPA3000_AC_pm1_i2c0x36_v7p4p3…
Part Number: DLPDLCR3010EVM-G2 Other Parts Discussed in Thread: DLP3010EVM-LC , Tool/software: I ordered three DLP on 7/8/2024, but one of them does not output any light. I think the projector is defective.
Part Number: DLPDLCR3010EVM-G2 Tool/software: Hi Experts,
We have queries about DLPDLCR3010EVM.
Background: The earliest DLPDLCR3010EVM had 0% image offset (i.e., the DLP was centered on the optical axis of the evaluation board optical setup. Later, this…
Part Number: DLPDLCR3010EVM-G2 Other Parts Discussed in Thread: DLPC3433 , DLPA3000 I ordered 3 DLPDLCR3010EVM-G2, but two out of the three seem to be defective. They do not project light when powered and switched on. 1 out of 3 worked normally.
Part Number: DLPDLCR3010EVM-G2 Other Parts Discussed in Thread: DLP3010EVM-LC , DLP3010 , DLPC3438 , DLPA2005 Hi,
I have an old DLPDLCR3010EVM light engine (RED PCBa with a "printer "kind USB 2.0 Type B connector) which was working good until I try to reflash…