Part Number: DRV8353RS-EVM Other Parts Discussed in Thread: MOTORWARE , DRV8353
Previously, the online GUI was not linked, so we are proceeding it again through motorware. The current progress is as follows.
We are following the SLVUBH8B guide. 1. Installation…
Part Number: DRV8353RS-EVM Other Parts Discussed in Thread: MOTORWARE , CCSTUDIO Currently, DRV8353RS-EVM kit is purchased and used. I followed the guide and installed MotorWare and UNIVERSAL GUI. All the copy paths in the guide were executed without any…
Part Number: DRV8353RS-EVM Other Parts Discussed in Thread: DRV8353 Hello Team,
I am working on DRV8353 with F280015x interfacing with 48V PMSM Motor with Hall feedback . At no load conduction Motor is working fine, motor all 3-phase current are same.
A…
Part Number: DRV8353RS-EVM Other Parts Discussed in Thread: MOTORWARE , DRV8353 , CCSTUDIO
Currently, DRV-8353RS-EVM kit is purchased and used. Follow the guide to.
slvu791b - Download and install the Setup_DRV8353Rx-1.0.0_EVM.zip file in accordance with…
Part Number: DRV8353RS-EVM Currently with the EVAL firmware pulled from the EVM's site, everything has compiled correctly. The only issue is when using the DRV8353Rx GUI, there seems to be no action happening. Following the DRV8353Rx-EVMInstaSPIN SoftwareQuickStartGuide…
Part Number: DRV8353RS-EVM Tool/software: Hi,
When we get the motor spinning, we are able to accelerate fine, but the FAULT LED is now lit up. Reading the registers during spinning results in none of Fault Status & VGS Status 2 registers having a flag…
Part Number: DRV8353RS-EVM Other Parts Discussed in Thread: DRV8353 Hello Team,
We Tried configured Universal Motor Controller sdk code based on F280025C to F2800157 Launchpad interface with Drv8353.
During debug mode, GUI Expression window ISR increment…
Part Number: DRV8353RS-EVM Hello Team
I am using hall feedback and a 48V PMSM motor. The motor is operating noiselessly and smoothly.
How to operate the motor so that it runs smoothly. What motor parameter settings need to be set up?
Best Regards,
…
Part Number: DRV8353RS-EVM Other Parts Discussed in Thread: DRV8353 ,
Hello Team,
We are working on DRV8353 and TI launchpad F280015x for BLDC motor application. We have below query while interfacing with TI driver board and launch pad.
I configured with…
Part Number: DRV8353RS-EVM Dear TI team ,
I am facing the following issues while DMC level -1 , I have try possible solutions but yet not shorted out
please me to solve it. as I debug the I faced these two fault as well as the default offset parameter…