Part Number: TPS53313 Hi,
I have made 5V, 6A output current switch circuit using TPS53313. I have followed G3-PLC (CENELEC Band) Data Concentrator Reference Design page #47.
Now when I test using 1 ohm, 5w or 10w resistor it gives maximum 5V, 2A…
Hi Karan,
1. As suggested modifications were done in ISR to dump the error status as below:- mcan_log_14apr.txt
2. Am able to run dl demo application ( ./run_app_tidl.sh ) even if asynchronous Tx , Rx hangs.
3. Upon adding Task_sleep(33) in both…
Thanks for your help, that's really critical for us. I was able to make more progress under your directions.
1. I did change the memory to get more memory for Linux. Now I have changed it back, after rebuilding, things are getting a little bit better…
Other Parts Discussed in Thread: 66AK2E05 Hi all,
We are developing a Custom Hardware Development based on TI 66AK2E05 Keystone II processor,
There is Microcontroller support in 66AK2E05 (Stellaris LM3S2D93).
In our Custom Hardware development…
Hi Yasuhiro-san,
How are you?
Thank you for using ADS5263 device and TSW1400EVM.
Here are the information we can provide for using TSW1400:
http://www.ti.com/tool/TSW1400EVM
download: High Speed Data Converter Pro GUI Installer, v5.00 (Rev.…
Hi Mateo,
How are you?
Thanks for using AFE5809EVM.
Yes, on our system
the output data generated by AFE5809 device are captured all the data by using TSW1400EVM.
And then TSW1400 GUI (High Speed Data Converter Pro GUI) does all kind of calculation…
Thank you for your response, bellow is our DMESG [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.1.43-android14-11-maybe-dirty (build-user@build-host) (Android (10087095, +pgo, +bolt, +lto, -mlgo, based…
Hi Ralph,
Thanks for your time.
Another question: Are you using TivaWare boot loader? => I am using bootloader that is part of zip file as a project available at http://processors.wiki.ti.com/index.php/TI-RTOS_USB_DFU
I followed all the steps mentioned…
Hi Steve,
Thanks a lot for looking into this! Have you found anything?
We got another unit with the same issue:
Regards,
Bill
OMAP-L138 initialization passed! Booting TI User Boot Loader UBL Version: 1.65 UBL Flashtype: NAND Starting NAND…
Other Parts Discussed in Thread: DP83867E Hola,
We follow up TI DP83867 reference design to plan the layout phase but we had met a problem about RJ45's DM、DP layout trace overlap/crossover issue！
After that, we had found the document of snlu190 and…
