Part Number: SN6505A Other Parts Discussed in Thread: ISOUSB211 , ISOUSB211DPEVM , Tool/software: Hi BU,
As you know, SN6505A is working with ISOUSB211 for isolation power in ISOUSB211DPEVM.
And now, my customer want to use same design and want to check…
Part Number: SN6505A-Q1 Tool/software: Hi experts,
When I tested the waveform of D1 pin and D2 Pin, Which is shown as below. Why the amplitude of them are 10V, I'm curious about the reason.
Best regards!
Ethan Liu
Part Number: SN6505A Can you suggest a transformer for the SN6505 that is specified to operate at -55C to 85C. 5V in and 5V out, very low current, 2 mA. The part is specified to operate at -55C but none of the transformers recommended in the data sheet…
Part Number: SN6505A Hi TI team,
We use SN6505A to make a isolation power.
There are some abnormal boards showed the power supply is restarted in cycle.
The board works normally at the beginning and after several hours when the temperature is high(Actually…
Part Number: SN6505A-Q1 Other Parts Discussed in Thread: SN6501 We are using SN6505 transformer driver in our project.
Original part was SN6501 and is being changed to SN6505 for better EMC performance.
We have question about how to terminate EN, CLK…
Part Number: SN6505A Hi team,
Can I know the internal pull-down resistance of EN pin? My customer wants to pull-up the EN pin and wants to know what's the best pull-up resistance.
Regards,
Xiaoying
Part Number: SN6505A Hi expert,
May I know what's the design consideration for the inductor of Voltage-uSecond spec? Is 40 must needed? What we typical see this parameter is 10~24.
Regards,
Allan
Hi Dirk,
Thank you for testing with an external clock and sharing your observations.
After further thought on this, it looks like the circuit is working as expected. The SN6505A solution with transformer 750315240 offers an efficiency between 80% and…
Part Number: SN6505A-Q1 For the figures entitled "Efficiency vs Load Current" (for example Figure 6-2), does the efficiency estimate include the losses from the diode?
Part Number: SN6505A Other Parts Discussed in Thread: SN6507 Hi Team:
My customer want to use SN6505A to make a 6W power module as 5V/1.2A.
But i check the spec of ILIM is more than 1.2A. so would you help to check whether we can reach to 1.2A ? and why…