Part Number: TMS320F2809 Error connecting to the target: (Error -183 @ 0x0) The controller has detected a cable break far-from itself. The user must connect the cable/pod to the target. (Emulation package 9.8.0.00235)
This is what i get when trying to…
Part Number: TMS320F2809 Other Parts Discussed in Thread: TMS320F2808 , I am converting a CCS3.3 to CCS12. I am using the TI v6.4.12 compiler. I am getting warnings during the link phase related to using an older flash library, flash2809_api_v100.lib
warning…
Part Number: TMS320F2809 Using CCS12, I have a project configuration that works, compiles and links creating an image, with C2000 Hex Utility disabled. If I enable the C2000 Hex Utility the same project configuration fails during the link stage. It seems…
Part Number: TMS320F2809 Hello, what is the difference between TMS320F2809PZQ and TMS320F2809PZS? other than the marking on the IC they appear to be identical
thanks
Part Number: TMS320F2809 Other Parts Discussed in Thread: TMS320F2808
Hello,
My PCB assembler is having a hard time finding parts (like everybody else) and I was looking for pin compatible alternates to the F2809.
My assembler has a quantity of the F2809…
Part Number: TMS320F2809 Other Parts Discussed in Thread: UNIFLASH
I have a custom board with TMS320F2809 DSP installed on it. I tried downloading my program to it and this is the error I get.
Error connecting to the target: (Error -183 @ 0x0) The controller…
Part Number: TMS320F2809 Other Parts Discussed in Thread: TMS320F280039C Hello,
We are a medical equipment manufecturer and we use the TMS320F2809 in our control boards. It is an "old" microcontroler, so we would like to know if you have a forecast…
Hi Andrias,
Andrias Pauda said: Even 100 ns after the breakpoint the registers still: I2CSTR.NACK=1, I2CSTR.SCD=1 and I2CSTR.BB=1.
Do the registers get cleared if you wait much longer than 100ns before stopping at a breakpoint?
Andrias Pauda said: About…
Part Number: TMS320F28027 Other Parts Discussed in Thread: TMS320F2809 I have the same issue.
The device is held in reset.
I have my custom board using the TMS320F2809
This is a new board but from the same batch that I have programmed before.
where should…
Part Number: TMS320F2809 I have emulator XDS510LC USB from Spectrum Digital. Is this emulator supported in windows 10 OS. if not then which emulator works best to program TMS320F2809 devices.