Hi, Erick,
We met the gpu error "CCCB has not progressed" after test for 444 times
0513-444次-黑屏-ccb.log.txt
pvrdumplog:
pvrlogdump_240513-444次-ccb.txt.gz
BRs
Tahm
Hi Suren,
We have added the prints in boot.img & super.img source codes of the local build SDK by following the below steps:
1) For the boot.img
zumi@zumi-To-be-filled-by-O-E-M:~/Project/Android/08_05_00/ti-kernel-aosp/out/android13-5.10/common…
Hi, Brijesh,
Brijesh Jadav said: Then is there an error in printing ie in below statement?
No.
reproduce log:
ldc_block_reproduce.txt
vx_target_ldc.c
Fullscreen
part_of_vx_target_ldc.c
Download
static vx_status VX_CALLBACK…
IRS-B210ST01-E.pdf tiduau1a.pdf Dear Thomas
I have few question
a) Can you please explain each stage of the attached circuit named as TI.pdf
b) Can you please explain each stage of my schematic.
The sensor used in both circuit is the same, i do…
Other Parts Discussed in Thread: CC2650STK Tool/software: Code Composer Studio
getting the below error on building the project **** Build of configuration FlashROM for project sensortag_ cc2650stk _app **** /opt/ti/ccsv6/utils/bin/gmake -k -j 1 all…
thanks for the response .. installed successfully.
getting the below error on building the project
**** Build of configuration FlashROM for project sensortag_cc2650stk_app ****
/opt/ti/ccsv6/utils/bin/gmake -k -j 1 all -O
Building file: /opt…
Other Parts Discussed in Thread: CC2640 , CC2650 Hi everyone,
I am working with cc2640 board and using flash to store my no.of power cycles.sometimes my device gets hung and it is not recovering.once re-flashed ,my board is working.
I am using SysCtrlSystemReset…
Hi Carrie ,
I ve at the end dumped all UB960 registers so please you can have a look and tell me "yes" or "no" if there should be valid signals in CSI TX port 0 lanes?
fie in attach
thank you
best regards
Carlo single-cam-ar0233-colorbar9.t…
