yihe said:
Hello
Yes, you can order TUSB3210 and replace it. you have to program the TUSB3210 so that it can communicate with Fusion GUO.
please refer the training video in my signature to understand how to program TUSB3210 .
Regards
Yihe
…
Part Number: TUSB3410 Hi team,
I'm looking for USB-GPIO controller IC to reset a specific board from external windows PC.
1-port is enough for my application.
Is TUSB3410 right part for this application?
It looks TUSB3210 looks better but the…
Dear Alix Wan,
thank you very much for answer.
No, after driver installation there is no TI_Audio EVM on my PC . I tested it on Win7 ( 64 bit ) so far.
Board is detected when USB cable is connected, but as Unknown device.
May be TUSB3210.bin file…
TUSB3210 is a USB device controller , TUSB3210 cannot to controller PCIe host, right?
My application want to PC write scsi command to USB device controller and USB device can program data to PCIe products.
That is a USB to PCIe bridge.
Part Number: USB-TO-GPIO Hi:
Make the TUSB3210 driver work properly,Then use the USB-TO-GPIO firmware loader ( www.ti.com/.../sluc199) Update firmware to restore USB-TO-GPIO normal.
I find the answer in the E2E ,Could you explain this step carefully…
eli,
Did you try disconnecting the PMBus connector to the board to see if it communicates . Normally i have observed that if the target is powered on before the USB to GPIO converter then , the device is not enumerated. The TUSB3210 will be powered…
Part Number: TLC5940 I'm an newbie for tlc5940 . I got TLC5940 EVM from my boss. According to the datasheet,1 GS Data Output Cycle consists of 4096 pulses.
I got a sample and sample code of TLC5940 EVM( USBv0.7_sourceCode, MCU: TUSB3210,software :LED…
Unfortunately the TUSB3210 driver predates me. I would not expect the TUSB3410 to work with the TUSB3210 driver. Reassigning the VID/PID will link driver to HW but I am not sure functionality would be maintained.
Sorry for my late response.
I succeeded in uploading the CDCE62002EVM firmware to the custom PCB in the following procedure.
1. Download the past GUI software package to get the EEPROM firmware.
(CDCE62002Fw.bin is included.)
★The latest GUI software…
