I have attached the TUB3210 datasheet, which is the core of the 2006 USB-TO-GPIO adapter.
Section 2.7 (Page 29) discusses the software reset function, but it's a 2-step process to set FRSTE (Firmware Reset Enable) then using the USB Function Reset…
SM-USB-DIG is not sold individually. It is a partner board that is bundled with EVMs like TMP102EVM. The TUSB3210 device used on the SM-USB-DIG is currently Lifetime-Buy status, which means it will be discontinued soon. The SM-USB-DIG and associated EVMs…
Hi Shu-Cheng,
I'm not sure I understood exactly what you are trying to do. Is my below interpretation correct?
Your system contains TUSB3210 + OPT300 and you are trying to write firmware for TUSB3210 to interface with OPT3001.
The firmware routes…
Statham:
pls search for USB to ANY and should be solution for USB to i2C.
TUSB3210 is very old device and we even can't find datasheet from t.com.
Regards
Brian
Part Number: CDCE62005
I wanted to ask what this circuitry does exactly. We are making a PCB with this PLL, however, we are not using USB to execute the SPI commands so we wont have the TUSB3210 IC and thus wont have the Y0_150_TERM input. What should…
Looking at the USB Interface Adapter it uses the TUSB3210PM and P0.3 (A_EN) and P0.4 (B_EN) appear to be the control pins. The TUSB3210 datasheet indicates that these are open drain outputs with a 100uA active pullup. Since I tied the A_EN and B_EN pins…
Part Number: OPT3001EVM Hello Everyone,
I've bought a set of OPT3001EVM, next I will develop PC application to easily read back current Lux value for production line.
But I didn't find any document talking about the communication command with OPT3001EVM…
Part Number: USB-TO-GPIO Hello E2E Experts,
Good day.
We recently acquired a TI USB Interface Adapter EVM or USB-to-GPIO
But I can't seem to get it to be recognized by the sample apps. We are using Windows 10.
When I run the USB Interface Adapter…
Hi Takushi,
Indeed the TUSB3210 requires a firmware and this firmware is application specific. The 3210 is a USB-based controller targeted as a general-purpose MCU (8052 integrated micro-controller) with GPIOs, withe the flexibility to be used for various…
