Part Number: DLPDLCR2010EVM Other Parts Discussed in Thread: DLP2010 Hi,
I'm keen on utilizing the DLP LightCrafter Display 2010 evaluation module, DLPDLCR2010EVM, to assess a conceptual design for our upcoming product. Before making a purchase, I'd like…
Part Number: DLPDLCR2010EVM Other Parts Discussed in Thread: DLPA2005 , DLPA3000 , DLP2010 , DLPC3435 , DLP3010 Dear Support team;
I bought DLPDLCR2010EVM.
I changed the register of LED max current and LED current.
These values are following.
#### Change currents…
Part Number: DLPDLCR2010EVM I have used this DLPDLCR2010EVM for a period of time, and it still works normally at first, but suddenly there are some problems that make it unable to use normally. At present, DLPDLCR2010EVM can normally switch and project…
Part Number: DLPDLCR2010EVM https://e2e.ti.com/support/dlp-products-group/dlp/f/dlp-products-forum/1003866/dlpdlcr2010evm-board-problem-identification
These two posts are the same person solving EVM quality issues.
Use background:
After receiving these…
Part Number: DLPDLCR2010EVM Team,
do we have 3D models of all modules of the EVM that we can provide to customers? Preferred file format is stp.
This would help to integrate the EVM in their test system.
Best regards
Part Number: DLPDLCR2010EVM Other Parts Discussed in Thread: DLP2010 , DLPDLCR230NPEVM , DLPDLCR2000EVM
Dear DLP Customers and E2E Users,
As of the writing of this post, DLP Lightcrafter Display 2010 EVM (DLPDLCR2010EVM) has reached end of life (EOL) state…
Part Number: DLPDLCR2010EVM Other Parts Discussed in Thread: DLPC3435 , PAD2005 I purchased a 5V3A power supply. After plugging it in, the PWRON (D16) and SYSPWR (D15) LEDs light up, move the SW_ONOFF switch to the ON position, the PROJ_ON LED does not…
Part Number: DLPDLCR2010EVM Hi Team,
We have received a concern from a customer that the DLPDLCR2010EVM becomes out of focus after operating for about 10 minutes. According to the customer,
The focus wheel on my projector is too loose and automatically…
Part Number: DLPDLCR2010EVM The EVM projected noisy images, after re-plug in the flat cable. no image but only the light screen. When using GUI application, the software does not find the DLP 2010.
Please advice what I can do to find the possible problem…