Part Number: TDA2EG-17 Other Parts Discussed in Thread: TDA2 , PCF8575 Tool/software: Linux Hi,
Now I have a problem that my custom board cannot detect USB flash disk in host mode when excuted "usb start" in Uboot mode.The log is attached.
And I open…
Other Parts Discussed in Thread: ADS8028 , ADS7886 Hi,
In one of my designs I am using an ADS8028 ADC. It is being clocked at 12MHz. 6 of the 8 channels are being used and the internal temperature sensing is not being used.
The 6 inputs are being…
1 - The downstream ports are the other 5 USB hubs. The series resistors and 22pF caps are on those hub sections. I have updated the schematic with your notes and corrected a few net name errors on the 5 downstream hubs.
7838.GEM4NFC Panel Programmer…
Please do not take this personally, I mean no offense but I have to get this off my chest.
This is why I think these community web-based chat forums are a terrible waste of time. It has taken 4 days to get to an irrelevant and incorrect question.…
There are a number of errata on this part but we are slowly moving to production with it. Debugging is very difficult if you want to use any interrupts and low power modes. Most real debugging must occur in the simulator. We have found a work around for…
Part Number: CC2564C Other Parts Discussed in Thread: , CC2564 Hi!
We're using CC2564C chip with CC2564CSTBTBLESW FreeRTOS stack, and are getting errors when trying to AUD_Open_Remote_Stream() to the following speakers:
JBL Flip 4
UE Boom 2
…
Part Number: TPS6594-Q1 Other Parts Discussed in Thread: TDA4VM , , SK-TDA4VM
Tool/software:
Hello, TI experts Since we have done many things but all the rails never turned on. When we take off TDA4VM from the board, all the rails turn on. I want…
Hello Cagri,
Please refer to the DCA1000 Debugging Handbook for common mmWaveStudio errors. It can be found here: https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/872161/faq-dca1000evm-dca1000evm-debug-resources
"Error: Connection…
