Frequent Questions

  • [FAQ] F05 Flash: What is depletion?

    Q: The flash API has a depletion recovery algorithm. How does depletion occur and how can I avoid it?

  • [FAQ] F05 Flash: Frequently Asked Questions

    Other Parts Discussed in Thread: C2000WARE Q: Where can I find answers to frequently asked questions related to F05 flash?

  • [FAQ] F05 Flash: Which C2000 devices have "F05 flash"?

    Other Parts Discussed in Thread: TMS320F28335 , TMS320F28235 , TMS320F2809 , TMS320F2812 Q: Which C2000 devices have "F05 flash"?

  • [FAQ] Can I connect two unidirectional channels on digital isolators to achieve a bidirectional channel for I2C communication?

    Can I connect two unidirectional channels on digital isolators to achieve a bidirectional channel for I2C communication?

  • [FAQ] Why is the logic LOW level output voltage, VOL1, up to 0.8V on Side1 of the ISO1540/ISO1541 and ISO1640/ISO1641 bidirectional I2C isolators?

    Other Parts Discussed in Thread: ISO1541 , ISO1540 Why is the logic LOW level output voltage, V OL1 , up to 0.8V on Side1 of the ISO1540 and ISO1541 bidirectional I2C isolators?

  • [FAQ] What are the recommended logic HIGH and LOW input voltage levels that can be applied to the isolated I2C devices, ISO1540 and ISO1541?

    Other Parts Discussed in Thread: ISO1541 , ISO1540 What are the recommended logic HIGH and LOW input voltage levels that can be applied to the isolated I2C devices, ISO1540 and ISO1541?

  • [FAQ] What is the current consumption of the isolated I2C devices, ISO1540 and ISO1541?

    Part Number: ISO1540 Other Parts Discussed in Thread: ISO1541 , What is the current consumption of the isolated I2C devices, ISO1540 and ISO1541?

  • [FAQ] TPS23751: Can APD pin left floating on my PoE PD controller?

    Part Number: TPS23751 Hi Darwin, For all of TI's PoE PDs, even if there is an internal pull down on APD, it is recommended and good practice to terminate this pin to RTN or ARTN if APD is not used. This is also described in the PoE PD's datasheet.

  • [FAQ] TPS2372: What kind of MPS (maintain power signature) feature does my PoE PD application need?

    Part Number: TPS2372 Other Parts Discussed in Thread: TPS2373 , , TPS23752 Hi Darwin, In general, a PD can meet MPS by supplying at least 0.5W to the PSE (usually meets the MPS spec by the load going into normal operation). We have one family of…

  • [FAQ] AWR1642: Implementing people count on AWR1642BOOST-ODS

    Part Number: AWR1642 Other Parts Discussed in Thread: IWR6843 , IWR1642BOOST Hi I'm trying to implement people count demo on AWR1642BOOST-ODS. I made following modification on chirp config : "channelCfg 3 3 0" to activate RX1, RX2, TX1 and TX2…

View FAQ threads
Recommended For You