Frequent Questions

  • [FAQ] RF37S114: I cannot read this tag with my Android device, why?

    Part Number: RF37S114 If you are working on evaluation of the RF37S114 ISO15693 transponders for your application, you may have discovered the tag is not readable by Android phones, proprietary readers, or sometimes even TI's own NFC/RFID Reader kits…

  • [FAQ] Which diodes should be used when using a transformer driver?

    Which diodes should be used when using a transformer driver?

  • [FAQ] Where is the isolation barrier located in a transformer based power supply?

    Where is the isolation barrier located in a transformer based power supply?

  • [FAQ] Can you step down voltage in a transformer driver system?

    Can you step down voltage in a transformer driver system?

  • [FAQ] Why use transformer drivers over other solutions?

    Why use transformer drivers over other solutions?

  • [FAQ] How can you choose a transformer for your system?

    How can you choose a transformer for your system?

  • [FAQ] What is the push-pull topology and how is it different from other isolated power architectures?

    What is the push-pull topology and how is it different from other isolated power architectures?

  • [FAQ] TPS65381A-Q1: Tool to calculate the watchdog and MCU ESM settings and validate their timing with respect to the MCU programmed timing?

    Part Number: TPS65381A-Q1 Is there a tool to calculate the watchdog and MCU ESM settings and validate their timing with respect to the MCU programmed timing?

  • [FAQ] BQ34Z100-G1: How do I set up the BQ34Z100-G1 for gauging with Lead Acid ( PbA )?

    Part Number: BQ34Z100-G1 To quickly begin communicating with the gauge, please follow this quickstart guide: www.ti.com/.../sluubv2 This will get you up and running with 4 V. Set FLASH UPDATE OK VOLTAGE = 1000 mV After communication has been established…

  • [FAQ] What is the difference between basic and reinforced digital isolators?

    What is the difference between basic and reinforced digital isolators?

View FAQ threads
Recommended For You