Frequent Questions

  • [FAQ] CC33XX-SOFTWARE: Where is the "SimpleLink CC33xx Calibrator Tool User's Guide" (SWRU602)?

    Part Number: CC33XX-SOFTWARE Tool/software: The "SimpleLink CC33xx Calibrator Tool User's Guide" (SWRU602) has been removed from the web and is now embedded within the SDK. Here are the steps to locate the document 1. On the CC33XX-SOFTWARE page…

  • [FAQ] PROCESSOR-SDK-AM64X: Linux hangs after restarting an R5F core

    Part Number: PROCESSOR-SDK-AM64X Tool/software: I am using AM64x Linux SDK 10.0 (or potentially the latest AM64x Linux SDK 9.2.1). When I use the Linux remoteproc driver to shut down an R5F core, and boot it back up, my processor hangs. An example…

  • [FAQ] What is the minimum difference between input voltage and LED (string) voltage for TPS922055 / TPS922054 / TPS922053 / TPS922052 to regulate the output current?

    Other Parts Discussed in Thread: TPS922052 , TPS922055 , TPS922054 , TPS922053 What is the minimum difference between input voltage and LED (string) voltage for TPS922055 / TPS922054 / TPS922053 / TPS922052 to regulate the output current?

  • [FAQ] AM654x, AM652x : Data sheet Documentation (about timing) of the power sequencing

    Part Number: AM6548 Tool/software: Hi TI experts, On page 142 of the datasheet "AM654x, AM652x Sitara Processors Silicon Revision 2.1 datasheet (Rev. C)", Figure 6-4. Power-Up Sequencing using On Chip Power-on-reset (POR) has labels such as "Note…

  • [FAQ] AM6422: How to configure the PCIe align with the simulation results.?

    Part Number: AM6422 Tool/software: Hi, I am setting the PCIe configuration. We simulated the PCIe using the IBIS model of AM6422. Below picture is the configuration we could get best simulation results. We don't know how to set it in AM6422 software…

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM625-Q1 / AM625SIP: eMMC0_DAT0 not enabled pull up by ROM

    Part Number: AM625 Tool/software: #1. On my customer board using eMMC0 boot, did not pull up eMMC0_DAT0, occasionally can't boot up by Power On, but can boot up by warm reset or power cycle. #2. Add pull up on eMMC_DAT0, can boot up always so far…

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM62L / AM62A / AM62P / AM62D-Q1 / AM64x / AM243x Design Recommendations / Custom board hardware design - Data sheet Pin Attributes and Pin connectivity related queries

    Part Number: AM625 Tool/software: Hi TI Experts, I have the below query regarding the data sheet Pin attributes Pin attributes I have a number of IOs that are not used, is there a connection recommendation Is there a recommendation for the…

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM62L / AM62A / AM62P / AM62D-Q1 / AM64x / AM243x Design Recommendations / Custom board hardware design - Current Data sheet revision, updates, revision backup and usage notes

    Part Number: AM625 Other Parts Discussed in Thread: AM62D-Q1 , AM62P , AM62L , , , AM623 , AM620-Q1 , AM62P-Q1 , AM62A3 , AM62A1-Q1 , AM62A7-Q1 , AM6412 , AM6422 , AM6442 , AM2434 Tool/software: Hi TI Experts, I have the below query Currently…

  • [FAQ] SK-AM69: How to run GStreamer pipeline with RTSP source

    Part Number: SK-AM69 Tool/software: How to stream H.264 encoded streams from a RTSP compliant IP camera or via RTSP server running on remote PC using GStreamer?

  • [FAQ] AM5728: Build and Test Guide for AM57xx Driver Examples using CCS

    Part Number: AM5728 Tool/software: Hi, How can I build and test an AM57xx driver example Using CCS?

View FAQ threads
Recommended For You