• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 242 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA2810: open loop gain graph on figure 44

Mark Philip Felipe
Genius 9705 points
Part Number: OPA2810

Hi Team, we would like to seek your assistance on the graph translation since the plot starts near 180 instead of 0.

Hoping for your inputs.

Thank you.

-Mark

  • 0
    Guru 48395 points

    Well Mark, 

    This curve is usually simulated from designer, the easiest way to set this up is with the V+ node grounded and run an inverting Aol test, that gives an initial phase of 180deg - just a small mistake I suspect,