• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 49 subscribers
  • Views 213 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM393: LEADFRAME

Dorian Vazquez
Intellectual 260 points
Part Number: LM393

Hello, 

I have parts from both the Aguascalientes and Malaysia assembly site and each part has a different lead-frame design.

Will this affect the parts functionally? 

  • 0
    Guru 140200 points

    Hi Dorian,

    have you bought both from an authorized TI's distributor?

    Kai

  • +1
    TI__Mastermind 49946 points

    Hello Dorian,

    Different assembly sites can have different build materials, depending on their capabilities.

    I can confirm that the leadframes are different between the Malaysia and Mexico sites, and that the X-rays resemble the leadframe drawings.

    Everything is the same except the leadframe - same die, mold compound, die attach, bond wires and plating.

    So, essentially, they are identical and will perform the same.