• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 340 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

AMC1200: powering the low side only.

AMC3301: multiple AMC3301

Natalia Gil Viloria
Prodigy 10 points

Part Number: AMC3301

Hi Alex, if I use the amc3301 to measure currents in a shunt of a photovoltaic installation in the DC side, can I power multiple amc3301s with my raspberry pi without any problem? this would be using the circuit recommended in the data sheet.

  • 0
    Guru 140200 points

    Hi Natalia,

    the low side supply current per AMC3301 will be up to 42mA.

    As example: If you have five AMC3301, the total power consumption of all five AMC3301 will be up to 210mA.

    Kai

  • 0
    TI__Guru**** 183241 points

    Hi Natalia,

    As Kai mentioned, the power requirements would be your limitation.  The 42mA is MAX with a load on the high side LDO.  If you are doing a differential to single ended conversion, those amplifiers would need to be powered as well, so that would be additional power budget to consider.