• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 48 subscribers
  • Views 165 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA126: What is the actual temperature range of this part.

Mike Woodard
Prodigy 105 points
Part Number: INA126

Hi, on page 1 on the INA126 datasheet it states that the operating temperature range for the INA126 is -40C to +85C (industrial temp range). Then on page 5 of the same datasheet it states the operating temperature of the INA126 is -55C to +125C. Can you tell me what the actual operating temperature range of this part is?

  • 0
    TI__Guru 54941 points

    Hi Mike,

    I see what the issues are. There are conflict information about the operating temperature information found in the datasheet. I believe that VSSOP package has wide operating temperature that is rated from -55C to +125C. 

    I am going to verify the above table with the system engineer and get it back to you. 

    Best,

    Raymond

  • 0 in reply to Raymond Zhang1
    TI__Guru 54941 points

    Hi Mike,

    I got more information in INA126 part. 

    INA126 part should “operate” from -55 to 125C. If you are concerned about the datasheet performance, you need to go by the table, which is specified from -40C to +85C. There may be degraded performance when operating at temperature outside of the range.   

    For instance, the drift figures are specified from -40C to 85C, which it is guaranteed between -40C to +85C as shown in the table below, not outside of the temperature range.  

     

    If you have additional questions, please let me know. 

    Best,

    Raymond