• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 48 subscribers
  • Views 198 views
  • Users 0 members are here
Support feedback
Options
Options

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA300: how to handle ENABLE pin

Toshiro Imi
Expert 6870 points
Part Number: INA300

Hello,

Our customer asked about if INA300 ENABLE connecting to VS directly causes some malfunction and/or damaged during start up.

Would you please let us know if the customer will face on something abnormal ?

Best regards,  

  • +1
    TI__Expert 4580 points

    Hello Imi-san,

    Thank you for your question. I'm assuming the customer doesn't plan on using the Enable function? If not, the INA300 Enable pin can be connected directly to Vdd (in fact, that's how the EVM is wired), and the device would remain in Enable mode.

    Louis

  • 0 in reply to Louis L
    TI__Expert 6870 points

    Hello, Louis-san,

    Thank you very much for your quick response.

    Yes. our customer will use in always on state, so that he asked about if ENABLE can connect to VS.

    Best regards,