TLV3502: Hi we need TLV3502 spice model

Caliber

Intellectual 810 points

Part Number: TLV3502
Other Parts Discussed in Thread: , TLV3501

Dear sir,

Good evening.

Kindly provide us TLV3502/TLV3502-Q1 spice model to simulate in TI for pspice.

We found only TLV3501 spice model which has shutdown feature in TLV3502 product reference design spice models.

Kindly provide us the spice model of TLV3502.

Thank you

Girish K

over 2 years ago

0 kai klaas69 over 2 years ago

Guru 140200 points

Then simply take the model of TLV3501 and don't use the shutdown feature

Kai

0 Caliber over 2 years ago

Intellectual 810 points

Dear Kai,

Thank you for quick reply.

How can i not use shutdown pin?

I'm comparing triangular pulse with sine wave to produce pulses but this shut down pin giving problem.

Kindly share your mail id to share images as in my pc we can't upload any files.

Thank you

Girish K

+1 Michael Steffes over 2 years ago in reply to Caliber

Guru 47445 points

Well Kai is right, the TLV3501 model netlist says this, simply tie its pin 6 to whatever DC voltage is needed to enable and ignore that feature in you TLV3502 design sims,

+1 Chuck Sins over 2 years ago

TI__Mastermind 23395 points

Girish

Thanks for your post. As everyone has posted, the intent is for you to use 2 of the tlv3501 models in your simulation and ground the shutdown pins. In general, this is how most comparators and amplifiers are modeled. The single channel model is intended to support the multi channel options.
Chuck

0 Caliber over 2 years ago in reply to Chuck Sins

Intellectual 810 points

Dear Chuck,

Thank you for your reply.

Our issue solved.

Thank you

Amplifiers

Amplifiers forum

TLV3502: Hi we need TLV3502 spice model