LMH5401: Spice Simulation

Fabio Soriano

Part Number: LMH5401

Which si the correct procedure to import PSpice model in Cadence 6.18, please?

I am having difficulty with importing the LMH5401 Differential Amplifier’s PSpice model (from the TI website) into Cadence 6.18 (using ADE Explorer).

The PSpice model that I am trying to import, is from the “Design tools & Simulation” tab in https://www.ti.com/product/LMH5401#design-tools-simulation

I also followed these instructions provided on the online Cadence Forum, but still had no luck.

https://community.cadence.com/cadence_blogs_8/b/rf/posts/tip-of-the-week-how-to-simulate-a-subcircuit-netlist-with-spectre-in-ade

Regards,

Fabio

over 4 years ago

0 Sima Jalaleddine over 4 years ago

TI__Mastermind 32485 points

Hello Fabio,

Depends on what error you are getting when you are importing this model into cadence. But, this thread seems to have followed the same instructions, and a fix was suggested, which worked for our high speed amplifier models.

Thank you,

Sima

Amplifiers

Amplifiers forum

LMH5401: Spice Simulation