OPA2140: OPA2140AIDRGR (POPA2140AIDRGR) Exposed Pad connection (GND/-Vcc/floating?).

Krzysztof Rybacki

Part Number: OPA2140

The datasheet of OPA2140 does not explain how to connect the Exposed Pad of DRG package (S-PWSON-N8). Should it be connected to the GND potential, -Vcc, or just left floating?

over 3 years ago

0 Raymond Zhang1 over 3 years ago

TI__Guru 57801 points

Hi Krzystof,

The OPA2140's thermal pad must be soldered to a printed-circuit board (PCB) and connected the most negative rail of the V-. If the single supply rail is used, the thermal pad is required to be connected to GND.

If you have additional questions, please let us know.

Best,

Raymond

0 Krzysztof Rybacki over 3 years ago in reply to Raymond Zhang1

Prodigy 10 points

Thanks for explanation. It resolves my issue.

Regards

Krzysztof

Amplifiers

Amplifiers forum

OPA2140: OPA2140AIDRGR (POPA2140AIDRGR) Exposed Pad connection (GND/-Vcc/floating?).