LMV761: Different marking and Missing Pin1

Edmund

I agree with Clemens.  I too am only seeing the option for C22A.

Please ask your customer for a snapshot of the box label from where the devices came from.

Chuck

Clemens

Thanks again for your contribution on the forum.

Hello, please see the label below that my customer have  given to  me.

Just to add, this is the bottom marking. 

Edmund

thanks for clarifying that you were referring to the bottom marking.  I apologize for not thinking of that.

the picture you show with the orientation dot is the appropriate marking for the parts that came in the box you have shown.

the three characters after the orientation dot represent the date code and assembly lot

I am not sure about the markings on the parts that do not have the pin 1.  All devices that are LMV761MFX/NOPB should have similar markings on the bottom. I presume you don't have the boxes for the other parts to confirm the part numbers.
As we mentioned in the previous response, the top should have C22A on them.

Chuck

Hello Edmund,

Please confirm that the top markings are "C22A" on all the devices. Can you get a similar photo of all the top markings of the above devices in the photo?

Also, is there a similar label on the reel or barrier bag? Can we get a photo of that?

We may be getting into some sensitive info that should not be shared publicly. May we contact you at your registered email address? If so, in the mean time, please ascertain where the devices were purchased (do not post publicly).

Hello paul, pls contact me on (removed)

We can diiscuss more info on email including pictures you need. 

Also, yes. All top markings are C22A. Its just that the otherr 3 parts do not have the orientation dot so i was wondering if it was a normal occurence.