• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 47 subscribers
  • Views 247 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Pin-outs mismatch "LM119H"

ANAND THIRAVIAM
Prodigy 30 points
Part Number: LM119

Hi,

     We are using this "LM119H" part in our design for this part the pin-outs marked on the LME package configuration contradicts with the pin configuration table, Kindly help on this here with I have attached a picture from from page 3 of datasheet(https://www.ti.com/lit/ds/symlink/lm119.pdf?ts=1642398373494&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FLM119) .

  • 0
    TI__Mastermind 25990 points

    Thanks for your post. I see what you mean. I believe the NAD and LME packages should have the same pinout and that the package drawings are correct and the pin description table is incorrect. We are off Monday due to US holiday but we will confirm Tuesday when we return. 
    Chuck 

  • +1
    TI__Guru 60786 points

    Hello Anand,

    The table is incorrect. The LME (metal can) and NAD (flat-pack) packages should have the same pin-out.

    The drawings are correct.

    We will look into getting it corrected - no timeline at this point.