While simulation even simple bias point, getting below error and simulation stops. How to overcome this.
INFO(ORPSIM-16594): To improve Pseudotransient Convergence and Performance, set following options to relax stabilization criteria for capacitor currents and inductor voltages: PTRANABSTOL=1e-5, PTRANVNTOL=1e-4
INFO(ORPROBE-3185): Simulation paused
Thanks.
Hey Anurag,
Can you please follow the below instructions on how to export your project.
First, save your project, then click the .dsn file in your project directory:
Next: go to file > archive project:
Lastly, select the directory you want to save your zip file, and make sure "Create single archive file" is checked.
Hit ok, then attach the file here so I may look at your circuit.
Best,
Jerry
Anurag,
The simulation as provided ran for me, however I'm not sure what you are attempting for the design. The amplifier is being driven out of the linear range, which is likely why you are getting convergence issues.
Your output is saturated and your inputs are unable to be driven to equal values. Additionally you are using the LM324LV which is a 5V part, the model you are looking for is the LMx24_LM2902 op amp, which is the 30V version.
Best,
Jerry
