THS3202 EVM PCB

Igor Spaseski

Other Parts Discussed in Thread: THS3202, THS3202EVM

Hello,

I'm having some problems designing new PCB with THS3202 operational amplifier. I want to know if it's possible to get the PCB layout from THS3202 EVM?

Thank you for your answer!

Bye

over 13 years ago

0 Kris F over 13 years ago

TI__Genius 17905 points

Hi Igor,

I have attached a zip file here with the Gerber files for the THS3202EVM.

Hope this helps! Let me know if you need help with any particular problems.

THS3202 DUAL DGN EVM REV. A.ZIP

0 Igor Spaseski over 13 years ago in reply to Kris F

Prodigy 50 points

Hi Kristoffer,

I'm designing a board like THS3202 EVM but only with two layers. The problem is that i don't know the width of the tracks and the distances between vias, polygon, connectors and so on. So I would love to have a project file of THS3202 EVM board or at least the top layer of the board. In what program is the board drawn? I'm using Altium Designer 09.

Thanks again for the reply.

Igor

0 Kris F over 13 years ago in reply to Igor Spaseski

TI__Genius 17905 points

The boards were designed in PCAD and I am not sure if PCAD projects can be converted to Altium Designer. There are free Gerber viewers available online so that you can view the files I uploaded previously and measure the track widths, etc. I also attach here a .dxf file for the EVM. You can open this file in AutoCAD and there are also free .dxf viewers online.

THS3202 Dual DGN.DXF

Amplifiers

Amplifiers forum

THS3202 EVM PCB