Dear expert,
We will be using the LM2901-Q1 IC for our project but we need below parameters:
- Failure Mode Distribution
- Pin FMEA
Can you provide parameters above?
Your help would be appreciated.
Best regards,
tatsuya yanagida
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear expert,
We will be using the LM2901-Q1 IC for our project but we need below parameters:
Can you provide parameters above?
Your help would be appreciated.
Best regards,
tatsuya yanagida
Yanagida-san
Thanks for your post. I will reach out offline to support. Since this will be addressed offline, I will be closing this post.
Chuck