TLV9051: TLV9051S package pin outs discrepancy from datasheet

ArTzy

Part Number: TLV9051

Hi Experts,

Good day.

We received discrepancy reports from Cx:

"I have found a technical error in one of your datasheets. The issue is that the component pinout diagram does not match the table below it. The error is on page 6 of:
https://www.ti.com/lit/ds/symlink/tlv9051.pdf"

Upon checking, I believe the correct pinouts for 6pins DBV should be the same with TLV9041S; and the only difference between TLV9051 DBV and TLV9051S DBV should be the additional shutdown pin, and position of the remaining pinouts functionality of this "S" version should be same with the 5pins.

Please confirm.

Regards,
Archie A.

over 2 years ago

0 Caro Walter over 2 years ago

TI__Mastermind 19722 points

Hey Archie,

Thanks for posting with the concern.
I'll go into lab and double check.
In the meantime, could the customer please post an image of the TI label?

All the best,
Carolina

0 ArTzy over 2 years ago

TI__Genius 15899 points

Hi Carolina,

Customer is with us, he tried the initial suggestions I provided. Confirmed that the pinouts from TLV9041S as shared is correct.

Looking forward for this D/S correction.

Thank you.

Regards,
Archie A.

+1 Robert Clifton56 over 2 years ago in reply to ArTzy

TI__Mastermind 24490 points

Hi ArTzy,

I have also confirmed the pinout should be like the TLV9041S. We have notified the team who does datasheet corrections on this issue. Sorry for the confusion that this has caused!

Best Regards,

Robert Clifton

0 ArTzy over 2 years ago in reply to Robert Clifton56

TI__Genius 15899 points

Hello Robert,

Thank you also for confirming!

73,
Archie A.

Amplifiers

Amplifiers forum

TLV9051: TLV9051S package pin outs discrepancy from datasheet