INA293: INA293A2QDBVRQ1

Kaoutar Ben Kaddour

Part Number: INA293

Dear Sir or Madam,

I am writing to know the terminal finish of INA293A2QDBVRQ1 if it is NiPdAu or NiAu or Au. Please could you tell me the thickness of Au.

Thanks in advance.

Best Regards,

Kaoutar Ben Kaddour

over 1 year ago

+1 Carolus Andrews over 1 year ago

TI__Mastermind 19375 points

Kaoutar,

Similar to your previous post, this information is available from the product table:

Similar to the previous post can you elaborate on the "thickness of Au" here? The gold in this plating would be part of the alloy, not a quantifiable thickness itself.

+1 Kaoutar Ben Kaddour over 1 year ago in reply to Carolus Andrews

Intellectual 740 points

Hi Carolus,

I can't elaborate the thickness of Au from your post as it is in mg rather than um.

0 Carolus Andrews over 1 year ago in reply to Kaoutar Ben Kaddour

TI__Mastermind 19375 points

Kaoutar,

As Clemens pointed out in the other post, for the structure of the lead finish, see the NiPdAu application report:

Amplifiers

Amplifiers forum

INA293: INA293A2QDBVRQ1