• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 48 subscribers
  • Views 292 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AMC1311-Q1: AMC1311BQDWVRQ1

Jagruti Sawant
Prodigy 30 points
Part Number: AMC1311-Q1
Other Parts Discussed in Thread: TLV316-Q1

I wanted to understand something for AMC1311BQDWVRQ1 & TLV316QDBVRQ1 spice models.

For AMC1311BQDWVRQ1, does the spice model contain all the variations according to min & max values as mentioned in the datasheet (snip attached below) ?

 

Similar query for TLV316-Q1 model as well. Kindly let me know at your earliest.

  • 0
    Guru 140200 points

    Hi Jagruti,

    Spice models usually contain only the typical datasheet specifications. Sometimes a parameter can be slightly higher or lower than the typical value. Also keep in mind that not all parameters may be simulated. Sometzimes the Spice model itself contains information in the header lines about what parameter is simulated and what is not.

    When you want to simulate the behaviour at min and max specs of offset voltage, for instance, you can add an external offset voltage source in series to one input. And when you want to simulate the input bias currents, you can add small current sources connected from signal ground to the input pins.

    Kai