I'd like to make confirm if this test condition is 2s2p or not.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
I am in contact with the validation team to get this information for you. Specifically what test are you speaking about? Table 7.4?
Regards,
Cas
Hello,
The validation team responded with "These numbers come from simulation."
Looking further into the way the testing is done. It is by taking the PCB out of the test. Mainly having a uniform forced temperature on the PCB as per JEDEC 51-8.
Now I was told we use simulations so I am guessing a similar constraint has been applied.
Regards,
Cas
Hello,
Sorry for my late reply.
Does JEDEC 51-8 contains any criteria for PCB construction?
If yes, that'll be my answer.
Regards,
Hello,
It seems that the JEDEC 51-8 does not specify a PCB construction it uses a cold plate method to isolate the heat to the package. I would like to reiterate that our values are derived from simulation and not real life testing.
Regards,
Cas