OPA2197: Parameters at 15V

Tom Schultz

Part Number: OPA2197

Team,

I'm posting on behalf of my customer. They would like to know the parameter values of the OPA2197IDR when tested at 15V. Can you see if there is any historic char data for any/all of the following items?

Quiescent Current @ 15V
Input Offset Voltage @ 15V
Input Offset Current @ 15V
Input Bias Current @ 15V
Slew Rate @ 15V
Noninverting Input Current Noise Density @ 15V

Thanks,

Tom

over 3 years ago

0 Marek Lis over 3 years ago

TI__Guru 74541 points

Tom,

Does your customer use +/-15V dual supply or a single +15V supply? Regardless, all OPA2197 specifications are defined for dual +/-4V to +/-18V supplies or for 8V to 36V single supply - see below. Thus, there is very little change in those parameters over the entire supply voltage range.

0 Tom Schultz over 3 years ago in reply to Marek Lis

TI__Expert 4170 points

Hi Marek, +/-15V

Tom

0 Marek Lis over 3 years ago in reply to Tom Schultz

TI__Guru 74541 points

All OPA2197 parameters are tested in production final test at +/-15V and thus assure meeting specific limits as specified in the datasheet. The limits are typically set by +/-4-sigma of Normal Gaussian distribution.

Amplifiers

Amplifiers forum

OPA2197: Parameters at 15V