Hi,
Good Day.
Can you provide the S-Parameters found in the datasheet of THS9001 to allow for design simulation?
Please advise. Thank you very much.
Best Regards,
Ray Vincent
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Good Day.
Can you provide the S-Parameters found in the datasheet of THS9001 to allow for design simulation?
Please advise. Thank you very much.
Best Regards,
Ray Vincent
Hello Ray,
We are looking into locating this data.
Thank you,
Sima
Hello Ray,
Unfortunately, I was unable to find the original files for the figures in the datasheet. Page 10 in the datasheet has raw data for one of the trends from VS=5V graphs for all four S-parameters (figures 12, 13, 14, and 15).
For simulation purposes, the EVM configured as specified in the table would be the control to simulate other configurations to check for matching for other L and R values from the figures 1, 2, 3 and 4:
Thank you,
Sima