Original question:
Hi, I'm trying to get a CAD file of the INA851EVM board so I can model it in with a new product I'm designing. Unfortunately I haven't been able to find a download on the website or any information in the user guide which would give me the form, fit, size etc of the board to correctly mount it in an enclosure.
Hi Paul,
The dimensions of the INA851EVM board are approximately x=9.144cm y=9.525cm, and height is approximately 2.5cm. You are welcome to use the INA851EVM for the INA851 initial device evaluation .and experimentation.
However, the INA851EVMs are intended solely to facilitate evaluation, experimentation, and demonstrate the INA851 device performance. Hence, the INA851EVMs demonstration boards are only intended for evaluation purposes, and are not intended as finished products. EVMs shall not be directly or indirectly assembled as a part or subassembly in any finished product, nor used in any finished product or production system, please refer to the evaluation module terms below:
Thank you and Regards,
Luis
