• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 448 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA233: Configuration/Calibration Guideline

Fabio Gou
Expert 4575 points

Part Number: INA233

Hi the customer is not familiar with our digital current sensor.

Whether we have the material about Configuration/Calibration Guideline?

  • 0
    TI__Expert 6602 points

    Hi Fabio,

    All the information on how our digital monitors work is located in the datasheet. We have sections on: 

    • Functional block diagram
    • ADC 
    • Power calculation
    • Power accumulator and energy measurements
    • I2C Communication
    • Fault detection
    • Functional modes (Conversion times, shutdown mode, continuous / triggered operation)
    • Calibration register data, register maps,

    And much, much more. The section where we have configuration and calibration would be in the "Programming" section: 

    Best,

    Mohamed