XTR111: XTR111

stephane toth

Prodigy 20 points

Part Number: XTR111

is it possible to connected pin 1 (VSP XTR111)) directly on 3 wires 0-20mA loop (15V 32V)

cdt

over 2 years ago

0 Clemens Ladisch over 2 years ago

Guru 320330 points

Yes; the supply pin is supposed to be connected this way.

0 stephane toth over 2 years ago in reply to Clemens Ladisch

Prodigy 20 points

thank you for the answer but I wanted to know if the voltage must be stable (VSP on ouput regulator for example) or we could directly put it on the wire power and therefore change with the length of the wire.

best regard

0 Clemens Ladisch over 2 years ago in reply to stephane toth

Guru 320330 points

The VSP range is designed to allow a direct connection. But you might need noise decoupling; see the discussion on p. 13 of the datasheet.

Amplifiers

Amplifiers forum

XTR111: XTR111