INA228_237_238EVM: INA228

maayan hasson

Part Number: INA228
Other Parts Discussed in Thread: INA228

Hi, I have an INA228 and I want to set it up correctly. However, all the combinations I've tried seem to be wrong. I would love it if you could explain to me how to correctly connect the load, as well as where to connect the inputs.

over 1 year ago

0 Mohamed Hamida over 1 year ago

TI__Expert 6602 points

Hi Maayan,

All detailed instructions on using the INA228EVM can be found in the users guide found here: https://www.ti.com/lit/ug/sbou241e/sbou241e.pdf. Please let me know if you have any specific issues that I can help troubleshoot, I would be happy to help support.

Best,
Mohamed

0 maayan hasson over 1 year ago in reply to Mohamed Hamida

Prodigy 50 points

Hi Mohamed

I looked at the user guide, but I'm still trying to figure out how to connect the load properly. In the guide it is mainly about the shunt resistor.

Maayan

+1 Mohamed Hamida over 1 year ago in reply to maayan hasson

TI__Expert 6602 points

Hi Maayan,

You have two options. Either connect an external shunt resistor, and the load will flow through the shunt resistor and feed the differential input to the EVM:

Or you could solder a resistor on the board where R1 is located and plug in the load current line IN+ and IN-.

Best,

Mohamed

Amplifiers

Amplifiers forum

INA228_237_238EVM: INA228