• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 48 subscribers
  • Views 281 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

INA901-SP: Single Event Effects Report

INA901-SP: Single Event Effects testing

Jonathan Barth
Prodigy 10 points
Part Number: INA901-SP

The last thread on Single Event Effects testing for this part stated that the SEE report would be available in 4Q2023. We're now near the end of 1Q2024, when should we expect the report to be made available? 

  • 0
    TI__Expert 6535 points

    Hello Jonathan,

    We are still working on the SEE report and it is expected to be released this quarter. Feel free to keep checking in as we get closer.

    Thanks,

    Levi DeVries

  • 0 in reply to Levi DV
    Prodigy 10 points

    Thank you. Would you be able to answer whether the device displayed any destructive single event effects up to an LET of 75 MeV-cm2/mg?

  • 0 in reply to Jonathan Barth
    TI__Expert 6535 points

    I can look into it, I will get back to you next week.

    Levi DeVries.

  • 0 in reply to Levi DV
    TI__Expert 6535 points

    Jonathan,

    The device was tested up to 93.98 MeV cm2/mg LETEFF and SELs were not observed up to a fluence of 1E7 ions. SETs were observed, but all SETs were recoverable without external intervention.

    So in short, no destructive events were observed up to an LETEFF 75MeV-cm2/mg.

    Let me know if you have any more questions,

    Levi DeVries