LMP7704-SP: 5962R1920601VXC - Tolerances on Drawing Question

Eatone Cheng

Part Number: LMP7704-SP

Hello,

I'm currently working on a design with the part 5962R1920601VXC (or the LMP7704-SP).

From the datasheet, there are given dimensions of 0.43mm MAX (from the bottom of the part to the leads) and 25mm MAX (lead tip-to-lead tip).

Could your team provide the Minimum values for these dimensions?

If it helps, from the DLA Land & Maritime drawing, these dimensions would the the "A1" and "E3" dimensions.

Thanks!

6 months ago

0 Raymond Zhang1 6 months ago

TI__Guru 54971 points

Hi Eatone,

Eatone Cheng said:
Could your team provide the Minimum values for these dimensions?

Our latest mechanical drawing indicates: the MAX dimension is 0.98mm and MIN dimension is approx. 0.80mm. Please make a note of it. The drawing is updated on 07/2022.

https://www.ti.com/lit/ml/mccf004b/mccf004b.pdf?ts=1713478214700&ref_url=https%253A%252F%252Fwww.ti.com%252Fsitesearch%252Fen-us%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Den-US

Eatone Cheng said:
25mm MAX (lead tip-to-lead tip).

The MAX dimension of the lead from tip to tip is 25mm. I have to ask the mechanical engineer if you need the MIN dimension of the lead from tip to tip. Please let me know.

Best,

Raymond