• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 278 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM393: SUSPECT DIGITAL ITEM EVALUATION

Arturo Garza
Prodigy 10 points
Part Number: LM393


LM393 is not the part I need support with 

SCL1107-NO is but it does not show up an option.

Please provide the description of this integrated circuit, SCL1107-NO. A datasheet would be best. Does it have digital content (software, firmware, processors, microcontrollers, programmable memory, programmable logic devices, and any other embedded digital devices (EDDs)).

  • 0
    TI__Guru 61286 points

    Hello Arturo,

    SCL1107-NO appears to be a broker part number. TI does not sell by these part numbers and does not support devices purchased through brokers.

    The many sites say SCL1107-NO is from "NS" (National Semi) in a 20 pin DIP - which is not correct for the LM393 (8 pins).

    Can you get the actual manufacturer orderable part number? i.e, "LMxxxyy".

    If the end device is a LM393 or any of it's family, it is an analog microcircuit and does NOT contain any "software, firmware, processors, micro-controllers, programmable memory, programmable logic devices, and any other embedded digital devices (EDD)s". It is just a dumb analog comparator.