ISO224: Could you tell me the IC you recommend?

Yuta Nishie

Genius 3565 points

Part Number: ISO224
Other Parts Discussed in Thread: AMC1350

Hi,

I have any questions.

1) Does TI have isolation products with the specifications listed below?

・Primary side input voltage range is ±5V or more

・1st-2nd order voltage resistance: AC1500V 60Hz for 1 minute

・AC input possible (commercial frequency 60Hz must be measurable)

・Satisfies the operating temperature range -25℃ to 85℃

・Target range of secondary side output voltage is approximately ±5V to ±10V.

I found ISO224, but please let me know if there is anything else.

2)Which product has the same or higher specs as the AD204KY(ADI)?

Best Regards,

Nishie

5 months ago

+1 Eva Mason 5 months ago

TI__Expert 5305 points

Hi Nishie,

Thank you for your interest in our isolation parts. Who is your customer and what is their system?

1. Could you use a resistor divider on your input? This would give more options from our device portfolio. The ISO224 is our product with the highest input range.

2. I would recommend the AMC1350 as the best replacement product.

Best regards,

Eva

0 Yuta Nishie 5 months ago in reply to Eva Mason

Genius 3565 points

Hi Eva-san,

Thank you for your support.

Customer names and applications cannot be listed in E2E. If necessary, we will notify you by private message.

1) I will check with the customer if a resistance divider can be used.

Best Regards,

Nishie

0 Eva Mason 5 months ago in reply to Yuta Nishie

TI__Expert 5305 points

Hi Nishie-san,

Got it, please let me know if there are any more questions.

Best regards,

Eva

0 Yuta Nishie 5 months ago in reply to Eva Mason

Genius 3565 points

Hi Eva-san,

OK.

I will let you know after the customer replies.

Best Regards,

Nishie

Amplifiers

Amplifiers forum

ISO224: Could you tell me the IC you recommend?