• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 48 subscribers
  • Views 211 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LM7171: Input offset voltage drift

LM7171: Device silicon version

Lars Veurink
Prodigy 20 points
Part Number: LM7171

Tool/software:

Hi,

A few months ago I asked a question regarding the offset voltage of the LM7171 version A. I would like to test some of the new silicon versions of the LM7171A for a new design. Am I guaranteed to get the correct version of the amplifier on the new silicon when I order these parts (after May 2nd as mentioned in the linked thread)? Or is there any possibility to get some sample parts?

Thanks in advance!

Lars

  • 0
    TI__Genius 12920 points

    Hi Lars,

    I will look into this for you and get back to you as soon as possible.

    Best Regards,

    Ignacio

  • +1
    TI__Genius 12920 points

    Hi Lars,

    I was able to look into this and was informed that there is no guarantee of getting the new silicon. We have inventory that includes both old and new silicon, which would mean there is a chance you will get the old silicon until it is finally depleted. As far as sampling, unfortunately the sampling fulfillment process for our devices come from the same inventory so there is also no guarantee new silicon would be sent.

    Best Regards,

    Ignacio